[1] E. Bratschun, D. Tait, and N. Moin, “Next-generation MRI scanner,” Colorado State University, Final Project Report, spring 2016.

[2] K. N. Bocan and E. Sejdic, “Adaptive transcutaneous power transfer to implantable devices: A state of the art review,” *Sensors*, vol. 16, no. 3, pp. 393, 2016.

[3] S. Y. R. Hui, W. Zhong, and C. K. Lee, “A critical review of recent progress in mid-range wireless power transfer,” *IEEE Trans. Power Electronics*, vol. 29, no. 9, pp. 4500–4511, 2014.

[4] D. Ahn and S. Hong, “Wireless power transmission with self-regulated output voltage for biomedical implant,” *IEEE Trans. Ind. Electronics*, vol. 61, no. 5, pp. 2225–2235, 2014.

[5] D. Ahn and S. Hong, “Wireless power transfer resonance coupling ampliﬁcation by load-modulation switching controller,” *IEEE Trans. Ind. Electronics*, vol. 62, no. 2, pp. 898–909, 2015.

[6] F. Rodes, M. Zhang, R. Denieport, and X. Wang, “Optimization of the power transfer through human body with an auto-tuning system using a synchronous switched capacitor,” *IEEE Transactions on Circuits and Systems II: Express Briefs*, vol. 62, no. 2, pp. 129–133, 2015.

[7] A. A. Danilov and E. A. Mindubaev, “Inﬂuence of angular coil displacements on effectiveness of wireless transcutaneous inductive energy,” *Transmission Biomed. Eng*., vol. 49, pp. 171–173, 2015.

[8] H. Li, J. Li, K. Wang, W. Chen, and X. Yang, “A maximum efﬁciency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling,” *IEEE Trans. Power Electronics*, vol. 30, pp. 3998–4008, 2014.

[9] M. S. Khoozani, H. M. Kelk, and A. S. Khoozani, “Comprehension of coils overlapping effect,” *Open Access Library Journal*, vol. 2, no. 1, e945, pp. 1-13, January 2015.

[10] R. Dunne, “Electromagnetic shielding techniques for inductive powering applications,” Thesis, Galway University, Ireland, 2009.

[11] Y. P. Su, X. Liu, and S. Y. Hui, “Extended theory on the inductance calculation of planar spiral windings including the effect of double-layer electromagnetic shield,” *IEEE Trans. Power Electronics*, vol. 23, no. 4, pp. 2052-2061, July 2008.

[12] S. C. Tang, S. Y. Hui, H. Shu, and H. Chung, “Evaluation of the shielding effects on printed-circuit-board transformers using ferrite plates and copper sheets,” *IEEE Trans. Power Electronics*, vol. 17, no. 6, pp. 1080-1088, July 2002.

[13] R. P. Merril, A twenty-eight channel coil array for improved optic nerve imaging, The University of Utah, May 2010.

[14] R. Brown and et al., *Magnetic resonance imaging: Physical principles and sequence design*, 2nd ed. Hoboken: John Wiley & Sons, 2014.

[15] P. Rinck, Magnetic resonance, a critical peer-reviewed introduction, Internet: http://www.magnetic-resonance.org, 2016.

[16] A. K. Sawhney: A course in electrical machine design, Dhanpat Rai, and Sons, 1970.

[17] W. H. Yeadon and A.W. Yeadon, *Handbook of small electric motors*, McGraw-Hill, 2001.

[18] M. T. Thompson, Inductance calculation techniques, Power Control and Intelligent Motion, December 1999.

[19] H. B. Dwight, “Some new formulas for reactance coils,” *Trans. Amer. Inst. Electr. Eng*., vol. 8, no. 2, pp. 1675–1696, 1919.

[20] F. W. Grover, Inductance Calculations: Working Formulas and Tables, New York, NY, USA: Dover, 2004.

[21] W. G. Hurley, M. C. Duffy, J. Zhang, I. Lope, B. Kunz, and W. H. Wolﬂe, “A uniﬁed approach to the calculation of self- and mutual-inductance for coaxial coils in air,” *IEEE Trans. Power Electronics*, vol. 30, no. 11, pp. 6155-6162, November 2015.

[22] C. Akyel, S. I. Babic, and M. Mahmoudi, “Mutual inductance calculation for non-coaxial circular air coils with parallel axes,” *Progress In Electromagnetics Research, PIER**.*, vol. 91, , pp. 287-301, April 2009.

[23] S. I. Babic and C. Akyel, “Calculating mutual inductance between circular coils with inclined axes in air,” *IEEE Trans. Magn*. , vol. 44, no. 7, pp. 1743 – 1750, 2008.

[24] C. Akyel, S. I. Babic, and M. M. Mahmoudi, “Mutual inductance calculation for non-coaxial circular air coils with parallel axes,” *Progress in Electromagnetics Research*, PIER 91, pp. 287–301, 2009.

[25] M. R. Alizadeh Pahlavani and A. Shiri, “Impact of dimensional parameters on mutual inductance of individual toroidal coils analytical and finite element methods applicable to Tokamak reactors,” *Progress in Electromagnetics Research B*, vol. 24, pp. 63-78, 2010.

[26] J. T. Conway, “Inductance calculations for non-coaxial coils using Bessel functions,” *IEEE Trans. Magn*., vol. 43, no. 3, pp. 1023-1034, 2007.

[27] W. G. Hurley and M. C. Duffy, “Calculation of self and mutual impedances in planar sandwich inductors,” *IEEE Trans. Magn*., vol. 33, no. 3, pp. 2282-2290, May 1997.

[28] T. H. Fawzi and P. E. Burke, “The accurate computation of self and mutual inductances of circular coils,” *IEEE Trans. Power App. and Systems, *vol. PAS-97, no.2, pp. 464 – 468, 1978.

[29] X. Liu and S. Y. R. Hui, “Optimal design of a hybrid winding structure for planar contactless battery charging platform,” in* Proc. 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting*, pp. 2568-2575, 2006.

[30] X. Liu, and S. Y. R. Hui, “An analysis of a double-layer electromagnetic shield for a universal contactless battery charging platform,” in* Proc. **2005 IEEE 36th Power Electronics Specialists Conference*, pp. 1767-1772, 2005.

[31] H. W. Secor, Tesla apparatus and experiments-how to build both large and small Tesla and Oudin coils and how to carry on spectacular experiments with them, Practical Electrics, 1921.

[32] T. P. Duong and J. W. Lee, “Experimental results of high-efficiency resonant coupling wireless power transfer using a variable coupling method,” *IEEE Microw. Wireless Compon. Lett.*, vol. 21, no. 8, pp. 442–444, Aug. 2011.

[33] A. Kurs, A. Karalis, R. Moffatt, J.D. Joannopoulos, P. Fisher, and M. Soljacic, “Wireless power transfer via strongly coupled magnetic resonances,” *Science*, vol. 317, pp. 83–86, Jul 2007.

[34] T. Miyamoto, Y. Uramoto, K. Mori, H. Wada, and T. Hashiguchi: Wireless charging system, U.S. Patent Appl. 20 120 038 317, Feb. 2012.

[35] J. Edlinger and J. Steinschaden, “Simulation and Characterization of a Miniaturized Planar Coil,” Thesis, Vorarlberg University, Aug. 2009.

[36] C. L. Holloway, “Electromagnetic shielding: principles of shielding of planar materials and shielding of enclosures,” National Institute of Standards of Technology (NIST), U.S. Department of Commerce, July 2010.

[37] C. L. Zimmerman, “Low-field classroom nuclear magnetic resonance system,” Massachusetts Institute of Technology, Feb. 2010.