[1] M. AboeldahabEmad, “Radiation effect on heat transfer in electrically conducting fluid at a stretching surface with uniform free stream”, *J. Phys D App. Phys.*, Vol. 33, No. 24, pp. 3180–3185, (2000).
[2] M. Gnaneswara Reddy, “Influence of magnetohydrodynamic and thermal radiation boundary layer flow of a nanofluid past a stretching sheet”, *Journal of **Scientific Research*, Vol. 6,No.2, pp. 257-272 (2014).
[3] E. M. Abo-Eldahab, and M. S. Elgendy, “Radiation effect on convective heat transfer in an electrically conducting fluid at a stretching surface with variable viscosity and uniform free stream”, *Physica Scripta*, Vol. 62, No. , pp. 321-325, (2000).
[4] A. Aziz, “A similarity solution for laminar thermal boundary layer over a flat plate with a convective surface boundary condition”, *Communications** **in **Nonlinear* Science and Numerical* Simulation*, Vol. 14, No. 4, pp. 1064-068, (2009).
[5] R. Cortell, “Radiation effects for the Blasius and Sakiadis flows with a convective surface boundary condition”, *Applied Mathematics* *and Computation*, Vol. 206, No.1, pp. 832-840, (2008).
[6] A. Ishak, “Similarity solutions for flow and heat transfer over a permeable surface with convective boundary condition”, *Appl Math Comput*, Vol. 217, No. 2, pp. 837-842, (2010).
[7] S. Yao, T. Fang and Y. Zhong, “Heat transfer of a generalized stretching/shrinking wall problem with convective boundary conditions”, *Comm Nonlinear SciNumSimul*, Vol. 16, No. 2, pp. 752-760, (2011).
[8] A. Alsaedi, Z. Iqbal, M. Mustafa, T. Hayat, “Exact solutions for the magnetohydrodynamic flow of a Jeffrey fluid with convective boundary conditions and chemical reaction”, *Z Naturforsch*, Vol. 67a, No. 1, pp. 517- 524, (2012).
[9] O. D. Makinde, and A. Aziz, “Boundary layer flow of a nanofluid past a stretching sheet with a convective boundary condition”, *Int. J. Therm Sci.*, Vol. 50, No.7, pp. 1326-1332, (2011).
[10] M. Gnaneswara Reddy, “Thermal radiation and chemical reaction effects on MHD mixed convective boundary layer slip flow in a porous medium with heat source and Ohmic heating”,*Eur. Phys. J. Plus*, Vol. 129, No. 41, pp.1-17, (2014).
[11] M. Gnaneswara Reddy, “Effects of Thermophoresis, viscous dissipation and Joule heating on steady MHD flow over an inclined radiative isothermal permeable surface with variable thermal conductivity”,*J**ournal of Applied Fluid Mechanics*, Vol. 7, No. 1, pp. 51-61, (2014).
[12] A. Bejan *, Convection Heat Transfer*, 3rd edn. Wiley, New York (2013)
[13] A. Bejan, and R. K. Khair, “Heat and mass transfer by natural convection in a porous medium”, *Int. J. Heat Mass Transfer*, Vol. 28, pp. 909–918, (1985).
[14] D. A. Nield, and A. Bejan, *Convection in Porous Media*, 4th edn. Springer, New York (2013)
[15] I. Pop, and D. B. Ingham, * Convective Heat Transfer: Mathematical and Computational* *Modeling of Viscous Fluids and Porous Media*, Pergamon, Oxford (2001)
[16] D. B. Ingham, and I. Pop, *Transport Phenomena in Porous Media II,* Pergamon, Oxford (2002)
[17] E.M. Sparrow, and J. L. Gregg, “Mass transfer, flow and heat transfer about a rotating disk”, *Trans. Am. Sot. Mech. Eng. Ser. C J. Heat Transfer*, Vol. 82, No. 4, pp. 294–302, (1960).
[18] R. G. Hering, and R. J. Grosh, “Laminar free convection from a non-isothermal cone at low Prandtl number”, *Int. J. Heat Mass Transfer*, Vol. 8, No. 10, pp. 1333–1337, (1965).
[19] F. Kreith, “Convective heat transfer in rotating systems *“, In: Irvine, T.F., Hamett, J.P. (eds.) Advances in Heat Transfer*, Vol. 5, pp. 129–251, (1968).
[20] K. Himasekhar, P.K. Sarma, and K. Janardhan, “Laminar mixed convection from a vertical rotating cone”, *Int. Commun. Heat Mass Transfer*, Vol. 16, No. 1, pp. 99–106, (1989).
[21] A.J. Chamkha, “Combined convection heat transfer from a rotating cone embedded in a power-law fluid saturated porous medium”, *Fluid/Particle Separat. J.*, Vol. 13, No. 1, pp. 12–29, (2000).
[22] H.S. Takhar, A.J. Chamkha, and G. Nath, “Unsteady mixed convection flow from a rotating vertical cone with a magnetic field”, *Heat Mass Transfer*, Vol. 39, No. 4, pp. 297–304, (2003)
[23] S. Roy, and D. Anil kumar, “Unsteady mixed convection from a rotating cone in a rotating fluid due to the combined effects of thermal and mass diffusion”, *Int. J. Heat Mass Transfer*, Vol. 47, No. 8, pp. 1673–1684, (2004).
[24] M. Gnaneswara Reddy ,and N. Bhaskar Reddy, “Mass Transfer and heat generation effects on MHD free convection flow past an inclined vertical surface in a porous medium”, *J**ournal of Applied Fluid Mechanics*, Vol. 4, No. 2, pp. 7-11, ( 2011).
[25] R. Bhuvanavijaya, and B. Mallikarjuna,” Effect of variable thermal conductivity on convective heat and mass transfer over a vertical plate in a rotating system with variable porosity regime”, *J. Naval Architect. Mar. Eng.*, Vol. 11, pp. 83–92, (2014).
[26] M. Gnaneswara Reddy, “Lie group analysis of heat and mass transfer effects on steady MHD free convection dissipative fluid flow past an inclined porous surface with heat generation”, *Theoret. Appl. Mech.*, Vol. 39, No. 3, pp. 233–254, (2012).
[27] B. Mallikarjuna, A. M. Rashad, Ali J. Chamkha, and S. Hariprasad Raju, “Chemical reaction effects on MHD convective heat and mass transfer flow past a rotating vertical cone embedded in a variable porosity regime”, *AfrikaMathematika*, Vol. 27, pp. 645-665, (2016).
[28] G. Awad, P. Sibanda, S.S. Mosta, and O.D. Makinde, “Convection from an inverted cone in a porous medium with cross-diffusion effects”, *Comp. Maths. Apps.* , Vol. 61, No. 5, pp. 1431–1441, (2011).
[29] N. Sandeep, B. Rushi Kumar and M. S. Jagadeesh Kumar, “A comparative study on convective heat and mass transfer in non-Newtonian nano fluid flow past a permeable stretching sheet”, *J. Mol. Liq.* Vol. 212, pp. 585-591, (2015).
[30] C.S.K. Raju, and N. Sandeep, Heat and mass transfer in MHD non-Newtonian bio-convection flow over a rotating cone/plate with cross diffusion, *Journal of Molecular Liquids*, Vol. 215, pp. 115-126, (2016).
[31] M. Gnaneswara Reddy, and N. Sandeep, “Heat and mass transfer in radiative MHD Carreau fluid with cross diffusion”, *Ain Shams Engineering Journal*, )2016( (Article in Press).
| |