[1] M. Yamanouchi, M. Koizumi, T. Hirai, and I. Shiota. Proceedings of the First International Symposium on Functionally Gradient Materials, Japan, (1990).

[2] M. Koizumi, “The concept of FGM” ,Ceramic Transactions, Functionally Gradient Materials, Vol. 34, pp. 3-10,(1993).

[3] Anon, FGM components: PM meets the challenge. Metal Powder Report; Vol. 51, pp. 28-32 ,(1996).

[4] N. Sata, ”Characteristic of SiC-TiB_ composites as the surface layer of SiC-TiB_-Cu functionally gradient material produced by self-propagating high-temperature synthesis”, Ceramic Transactions, Functionally Gradient Materials, Vol. 34, pp. 109-116,(1993).

[5] H. Yamaoka, M. Yuki, K. Tahara, T. Irisawa, R. Watanabe, and A. Kawasaki. “Fabrication of Functionally Gradient Material by slurry stacking and sintering process”, Ceramic Transactions, Functionally Gradient Materials, Vol. 34, pp. 72-165, (1993).

[6] B. H. Rabin, and R. J. Heaps, “Powder processing of Ni/Al2O3 FGM”, Ceramic Transactions, Functionally Gradient Materials, Vol. 34, pp. 173-180, (1993).

[7] N. Noda, “Thermal stresses in functionally graded materials”, Journal of Thermal Stresses Vol. 22, pp. 477-512, (1999).

[8] T. Fuchiyama, and N. Noda, “Analysis of thermal stress in a plate of functionally gradient material”, Journal of Science and Engineering, Vol. 16, pp. 263-268, (1995).

[9] Y. Obata, and N. Noda,” Steady thermal stresses in a hollow circular cylinder and hollow sphere of a functionally gradient material”, Journal of Thermal Stresses, Vol. 17, pp. 471-487, (1994).

[10] J. N. Reddy, and C. D. Chin, “Thermo mechanical analysis of functionally graded cylinders and plates”, Journal of Thermal Stresses, Vol. 21, pp. 593-626, (1998).

[11] M. Jabbari, S. Sohrabpour, and M. R. Eslami,”Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric load”, International Journal of Pressure Vessels and Piping, Vol. 79, pp. 493-497, (2002).

[12] H. Awaji, and R. Sivakumar, “Temperature and stress distribution in a hollow cylinder of functionally graded material; the case of temperature-independent material properties”, Journal of the American Ceramic Society, Vol. 84, pp. 1059-1065, (2001).

[13] S. Takezono, K. Tao, E. Inamura, and M. Inoue, “Thermal stress and deformation in functionally graded material shells of revolution under thermal loading due to fluid”, JSME International Journal Series, Vol. 39, pp. 573-581, (1996).

[14] G. R. Ye, W. Q. Chen, and J. B. Cai, “A uniformly heated functionally graded cylindrical shell with transverse isotropy”, Mechanics Research Communications, Vol. 28, pp. 535-542, (2001).

[15] K. M. Liew, S. Kitipornchai, X. Z. Zhang, and C. W. Lim, “Analysis of the thermal stress behavior of functionally graded hollow circular cylinders”, International Journal of Solids and Structures, Vol. 40, pp. 2355-2380, (2003).

[16] R. N. Arnold, and G. B. Warburton, “Flexural vibrations of the walls of thin cylindrical shells having freely supported ends”, Proceedings of the Royal Society London A, Vol. 197, pp. 238-256, (1949).

[17] A. Ludwig, and R. Krieg,”An analytical quasi-exact method for calculating Eigen vibrations of thin circular cylindrical shells”, Journal of Sound and Vibration, Vol. 74, pp. 155-174, (1981).

[18] H. Chung,”Free vibration analysis of circular cylindrical shells”, Journal of Sound and Vibration, Vol. 74, pp. 331-350, (1981).

[19] W. Soedel, ”A new frequency formula for closed circular cylindrical shells for a large variety of boundary conditions”, Journal of Sound and Vibration, Vol. 70, pp. 309-317, (1980).

[20] A. Bhimaraddi, “A higher order theory for free vibration analysis of circular cylindrical shells”, International Journal of Solids and Structures, Vol. 20, pp. 623-630, (1984).

[21] K. P. Soldatos, and V. P. Hajigeoriou, “Three-dimensional solution of the free vibration problem of homogeneous isotropic cylindrical shells and panels”, Journal of Sound and Vibration, Vol. 137, pp. 369-384, (1990).

[22] K. Y. Lam, and C. T. Loy, ”Effects of boundary conditions on frequencies characteristics for a multi-layered cylindrical shell”, Journal of Sound and Vibration, Vol. 188, pp. 363-384, (1995).

[23] C. T. Loy, K. Y. Lam, and C. Shu, ”Analysis of cylindrical shells using generalized differential quadrature”, Shock and Vibration, Vol. 4, pp. 193-198, (1997).

[24] MM. Najafizadeh, MR. Isvandzibaei, Vibration of functionally graded cylindrical shells based on higher order shear deformation plate theory with ring support. Acta Mechanica 2007; 191: 75-91.

[25] M. M. Najafizadeh, and M. R. Isvandzibaei, "Vibration of functionally graded cylindrical shells based on different shear deformation shell theories with ring support under various boundary conditions", Journal of Mechanical Science and Technology, Vol. 23, pp. 2072-2084, (2009).

[26] F. Tornabene, "Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution", Comput. Methods Appl. Mech. Engrg., Vol. 198, pp. 2911-2935, (2009).

[27] P. Malekzadeh, and Y. Heydarpour, "Free vibration analysis of rotating functionally graded cylindrical shells in thermal environment", Composite Structures, Vol. 94, pp. 2971-2981, (2012).

[28] M. J. Ebrahimi, and M. M. Najafizadeh, "Free vibration of two-dimensional functionally graded circular cylindrical shells on elastic foundation", Modares Mechanical Engineering, Vol. 38, No. 1, pp. 308-324, (2013).

[29] R. Bahadori, and M. M. Najafizadeh "Free vibration analysis of two-dimensional functionally graded axisymmetric cylindrical shell on Winkler–Pasternak elastic foundation by First-order Shear Deformation Theory and using Navier-differential quadrature solution methods", Applied Mathematical Modelling, Vol. 39, pp. 4877-4894, (2015).

[30] G. G. Sheng and X. Wang, “Effects of Thermal Loading on the Buckling and Vibration of Ring-Stiffened Functionally Graded Shell”, J. Therm. Stresses, Vol. 30, pp. 1249-1267, (2007).

[31] K. Y. Lam, and W. Qian, “Vibrations of Thick Rotating Laminated Composite Cylindrical Shells”, J. Sound Vibr., Vol.

225, No. 3, pp. 483-501, (1999).

[32] R. Naj, M. Sabzikar Boroujerdy and M. R. Eslami, “Thermal and mechanical instability of functionally graded truncated conical shells”, Thin-Walled Structures, Vol. 46, pp. 65-78, (2008).

[33] H.-S. Shen, and N. Noda, “Postbuckling of FGM Cylindrical Shells under Combined Axial and Radial Mechanical Loads in Thermal Environments”, Int. J. Solids Struct., Vol. 42, pp. 4641-4662, (2005).

[34] M. S. Qatu, “Vibration of Laminated Shells and Plates”, Elsevier, The Netherlands, (2004).

[35] A. V. Lopatin, and E. V. Morozov, "Buckling of the composite sandwich cylindrical shell with clamped ends under uniform external pressure", Compos. Struct., Vol. 122, pp. 209-216, (2015).